Measurement and correlation of friction characteristic of flow through foam matrixesLIU, J. F; WU, W. T; CHIU, W. C et al.Experimental thermal and fluid science. 2006, Vol 30, Num 4, pp 329-336, issn 0894-1777, 8 p.Article

In-situ synthesis and wear performance of TiC particle reinforced composite coating on alloy Ti6Al4VZHANG, S; WU, W. T; WANG, M. C et al.Surface & coatings technology. 2001, Vol 138, Num 1, pp 95-100, issn 0257-8972Article

The oxidation of a Co-15 WT% ce alloy under low oxygen pressures at 600-800°CFU, G. Y; NIU, Y; WU, W. T et al.Corrosion science. 1998, Vol 40, Num 7, pp 1215-1228, issn 0010-938XArticle

The sulfidation of two-phase Cu-Ag alloys in H₂-H₂S mixtures at 550-750°CGESMUNDO, F; NIU, Y; CASTELLO, P et al.Corrosion science. 1996, Vol 38, Num 8, pp 1295-1317, issn 0010-938XArticle

Heuristic approach to Chinese-character searchWU, W. T.Kybernetes. 1984, Vol 13, Num 1, pp 39-42, issn 0368-492XArticle

A non-classical type of third-element effect in the oxidation of Cu-xCr-2Al alloys at 1173 KWANG, S. Y; GESMUNDO, F; WU, W. T et al.Scripta materialia. 2006, Vol 54, Num 9, pp 1563-1568, issn 1359-6462, 6 p.Article

Application of binary immobilized Candida rugosa lipase for hydrolysis of soybean oilTING, W. J; TUNG, K. Y; GIRIDHAR, R et al.Journal of molecular catalysis. B, Enzymatic. 2006, Vol 42, Num 1-2, pp 32-38, issn 1381-1177, 7 p.Article

Repeated-batch production of kojic acid in a cell-retention fermenter using Aspergillus oryzae M3B9WAN, H. M; CHEN, C. C; GIRIDHAR, R et al.Journal of industrial microbiology & biotechnology. 2005, Vol 32, Num 6, pp 227-233, issn 1367-5435, 7 p.Article

Survival of motor neurons and expression of β-amyloid protein in the aged rat spinal cordXIE, Y. Y; YAO, Z. B; WU, W. T et al.Neuroreport (Oxford). 2000, Vol 11, Num 4, pp 697-700, issn 0959-4965Article

Oxidation of powder metallurgical Ag-Cr alloys in 1 atm O₂ at 700-800°CSONG, J. X; WU, W. T; NIU, Y et al.High-temperature materials and processes. 2000, Vol 19, Num 2, pp 117-125, issn 0334-6455Article

Theoretical study of the effects of alloying elements on the strength and modulus of β-type bio-titanium alloysSONG, Y; XU, D. S; YANG, R et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 1999, Vol 260, Num 1-2, pp 269-274, issn 0921-5093Conference Paper

Creep deformation in heat treated componentsTSZENG, T. C; WU, W. T.Studies in applied mechanics. 1997, pp 361-371, issn 0922-5382, isbn 0-444-82670-XConference Paper

Simulations of cold forging processes by the DEFORM systemOH, S. I; WU, W. T; TANG, J. P et al.Journal of materials processing technology. 1992, Vol 35, Num 3-4, pp 357-370, issn 0924-0136Conference Paper

Role of platinum in the Na₂SO₄-induced hot corrosion resistance of aluminum diffusion coatings = Rôle du platine sur la résistance à la corrosion à chaud induite par Na₂SO₄ des revêtements par diffusion d'AlWU, W. T; RAHMEL, A; SCHORR, M et al.Oxidation of metals. 1984, Vol 22, Num 1-2, pp 59-81, issn 0030-770XArticle

Measurement and correlation of hydraulic resistance of flow through woven metal screensWU, W. T; LIU, J. F; LI, W. J et al.International journal of heat and mass transfer. 2005, Vol 48, Num 14, pp 3008-3017, issn 0017-9310, 10 p.Article

The corrosion behavior of two-phase Ni-Dy alloys in a eutectic (Li, K)₂CO₃ mixture at 650 °CZENG, C. L; ZHANG, T; GUO, P. Y et al.Corrosion science. 2004, Vol 46, Num 9, pp 2183-2189, issn 0010-938X, 7 p.Article

Tensile properties and microstructure of in situ NiAl-Cr (Zr) eutectic compositeGUO, J. T; QI, Y. H; LI, G. S et al.Composite structures. 2003, Vol 62, Num 3-4, pp 323-327, issn 0263-8223, 5 p.Conference Paper

Corrosion behavior of pre-oxidized Ni-Ti alloys in eutectic (Li, K)₂CO₃ mixture at 650 °CZENG, C. L; ZHOU, T; WU, W. T et al.Journal of materials science letters. 2002, Vol 21, Num 12, pp 907-909, issn 0261-8028, 3 p.Article

Electrochemical impedance study of the corrosion of Fe-Cr alloys in molten (Li, K)₂CO₃ eutectic mixtureZENG, C. L; WANG, W; NIU, Y et al.Materials science forum. 2001, pp 809-816, issn 0255-5476, isbn 0-87849-877-X, 2VolConference Paper

Synthesis and characteristics of consolidated nanocrystalline two-phase Ag₅₀Ni₅₀ alloy by hot pressingZHAO, Z. L; ZHAO, Y; NIU, Y et al.Journal of alloys and compounds. 2000, Vol 307, Num 1-2, pp 254-258, issn 0925-8388Article

The oxidation of a Co-15 wt%Y alloy under low oxygen pressures at 600-800°CWU, W. T; YAN, R. Y; NIU, Y et al.Corrosion science. 1997, Vol 39, Num 10-11, pp 1831-1843, issn 0010-938XArticle

Interdiffusion between the platinum-modified aluminide coating RT22 and nickel-based single-crystal superalloys at 1000 and 1200°CGÖBEL, M; RAHMEL, A; SCHÜTZE, M et al.Materials at high temperatures. 1994, Vol 12, Num 4, pp 301-309, issn 0960-3409Article

Early Neolithic Hemodu Culture along the Hangzhou Estuary and the Origin of Domestic Paddy Rice in ChinaZHAO, S; WU, W. T.Asian perspectives (Honolulu). 1986, Vol 27, Num 1, pp 29-34, issn 0066-8435Article

Acidic and basic fluxing of Ni-base superalloys in a 90Na₂SO₄-10K₂SO₄ melt at 1173 K = Flux acide et basique des superalliages à base de Ni dans un mélange 90Na₂SO₄-10K₂SO₄ à 1173 KWU, W. T; RAHMEL, A; SCHORR, M et al.Oxidation of metals. 1983, Vol 19, Num 5-6, pp 201-229, issn 0030-770XArticle

Application of Nano-HZSM-5 Catalyst on Aromatization of FCC GasolineZHU, J; WU, W. T; CHANG, Y et al.Petroleum science and technology. 2010, Vol 28, Num 1-3, pp 7-12, issn 1091-6466, 6 p.Article